Triumph Tiger 1050 Problems: How to Fix Them in Minutes

No matter how much a bike costs or what the brand is, it may seem susceptible to some mechanical problems. But not all bikes cause complex, hard-to-fix issues. As the Triumph Tiger 1050 problems are not intimating at all, it can be placed in that group. Nonetheless, it appears to be challenging to get them solved without prior expertise.

As an owner, you need to master the methodologies for fixing issues that you may come across before long. Lucky you! This article is designed to help you diagnose and troubleshoot its problems. Let’s dig deeper and explore the queries that are crucial to keeping your bike intact.

The most common Triumph Tiger 1050 problems and solutions:

A bike requires keen observation and proper maintenance to prevent damage. Faulty parts, corrosion, and defective navigation system always cause some serious problems with a motorcycle, and the Triumph Tiger is not free from them. Here are some of the issues that can interrupt the smooth ride of the bike:

Broken head gasket:

The Triumph Tiger 1050 motorcycle has some old, known issues—the broken head gasket is one of them. The problem is so detrimental that it can hamper the overall performance, mileage, and efficiency of the bike. There might also arise other minor setbacks in the operating mechanism once the seal between the cylinder head and cylinder block gets blown or broken.

As a consequence of the faulty head gasket, the cylinder may fail to fire. Even sometimes, the cylinder may run too lean because it is penetrating an enormous amount more air into it than usual. It may also lead to an extreme coolant evacuation, which results in overheating the engine.

You may experience contaminated oil as the possibility of engine oil getting mixed with coolant is high due to a failing head gasket with the Triumph Tiger 1050. Moreover, when the engine is idle, it can cause an annoying noise in the cylinder, and you may notice blue smoke coming from the exhaust. In a word, it will put you in a horrible situation while you’re riding with full enthusiasm, spirit, and intention.

Replacing the defective head gasket with a new, quality one is always recommended if it fails to work. To replace a head gasket at home, you can stick to the following steps:

• Remove or rebolt the thermostat from the engine block while your engine is cold.
• Flush the cooling system to make sure the coolant lines and hoses are intact.
• Add a professional-grade head gasket sealer to fix the break.
• Install the radiator cap and let the engine idle for some time.

Transmission problem:

The motorcycle transmission problem is something that can hardly be avoided. A failure with the transmission can cause dangerous riding conditions, reducing power, speed, and mileage. The symptoms of transmission failure are manifold, some of them are shaft or gear corrosion, shift fork bent, and clutch failure. Unusual noise and a burning smell are also other salient signs of a faulty transmission system.

And it’s been heard that the Triumph Tiger 1050 has problems with the transmission, too. If you own it, you may have difficulty shifting the clutch. It will also make you experience delayed movement, along with having trouble finding neutral when the bike is stopped. When shifting gears, you will encounter jerking motions as well.

Changing the direction of rotation of your bike will seem almost tedious if your bike is struck with a transmission or gearbox issue. It’s apparent that you have to troubleshoot the problem with optimal care and effort to get rid of the turbulence for a prolonged period of time. How do you fix it? You first need to disassemble the engine and visually check the parts.

If any of the parts of the transmission system get damaged, you can undoubtedly replace or repair them to get permanent relief. To avoid recurrent issues,  you have to refrain from triggering rapid acceleration or compression braking. Besides, you can modify your shifting techniques to prevent components from sustaining further damage.

Engine stalling:

Engine stalling on a motorcycle is always frustrating. Due to the stall in an engine, riders always stumble to ride miles, no matter how powerful the bike is. A stalling engine results in a loss of power, an increased consumption rate of fuel, and insufficient maneuverability. What forces the engine to stall? Lean air/fuel ratios, worn or dirty spark plugs, bad fuel, and vapor lock are considered to be the main culprits.

In addition, issues with the bike’s engine appear if it has a clogged air filter, a dirty fuel filter, a faulty gas cap, or air leakage. That means the stall in an engine occurs when a wide range of mechanical components get out of order. If you have a classic Triumph Tiger 1050, you may also discover the engine does not start or die over time.

You may also lose your power brakes and encounter a bad misfire with the engine frequently. The problem can risk your life by stopping you from running, even in traffic, unless you become mindful of it and get it quickly fixed. How to prevent the engine from stalling while driving? To say it straight, you need to diagnose the issues with all the underlying mechanical parts and get them repaired or replaced.

With sublime patience and practice, you can overcome such a serious issue if you fall in humiliation on the driveway. Try to adhere to the following steps to overcome it:

• With the throttle completely closed, move off your motorcycle if it’s stalling.
• Make the engine produce enough torque, ensuring proper clutch input.
• Select the first gear after squeezing the clutch fully.
• Then begin to release the clutch slowly to allow the bike to start to move.

Faulty clutch system:

The failure of the clutch system is considered to be the core problem of the Triumph Tiger 1050 motorcycle. Why? That’s because the transmission, shifting, slipping, and braking issues, indeed result from the faulty clutch according to riders’ opinions and feedback. Besides, an erratic transfer of power also happens to the engine due to the interruption in the operation of the clutch system.

The clutch of your bike can be defined as damaged if you experience jerkiness while shifting gears. Apart from damage, you may encounter clutch slip, which will prevent the flywheel from spinning by maintaining consistency with the friction plates. Another problem with the motorcycle clutch system is the clutch drag, which causes the bike to lose its smoothness while running.

To be honest, you won’t find maximum comfort and performance until you ensure a fix. It’s always advisable to replace the entire clutch system when it appears to be defective. But you can stick to some precautions to keep your bike well-maintained. Here are the steps you can adopt:

• Try to lubricate the clutch on a regular basis to keep it sharp, operative, and mobile.
• Keep the clutch plates cleaned and refurbished to avoid corrosion.
• Replace any worn clutch components as soon as you find them.
• Get your bike in for service or maintenance as per a specific routine.

Uncomfortable seating posture:

Every motorcycle has some distinct problems. The Triumph Tiger also has a unique imperfection: the inclusion of an uncomfortable seating posture. Riders always complain about the inconvenience of its seat, as they suffer much while having long rides. To ensure a soothing ride, you need to fix the seat cushion without delay.

You first need to adjust the seat height as per your body frame to enjoy the ride to the fullest. Adding a gel cushion can amplify the softness of the seat and provide you with a fatigue-free ride. But these are not permanent solutions at all. You have to try to replace the seat with a quality one that suits your length, posture, and body frame.

Frequently asked questions:

We have had enough discussions on the Triumph Tiger 1050’s problems and solutions. Now we are at the point of exploring some additional queries that can enrich your understanding of choosing the right bike. By answering some frequently asked questions, we will hint at the factors you need to consider before purchasing a bike.

Why is the Triumph Tiger motorcycle in high demand?

The motorcycle has gained optimal trust and reliance across the world as it comes with a powerful 1050 cc engine, top-quality mechanical parts, and a six-speed manual transmission system. It offers a mileage of up to 17 km/l, which is really phenomenal.

Does the Triumph Tiger 1050 have a carburetor problem?

Till now, nobody has reported a carburetor problem with the Triumph Tiger 1050 bike. But many owners found an adjustment issue with the bike’s carburetor. As the issue is not serious, there is nothing to worry about.

Does the Triumph Tiger produce constant noise?

No bike is completely perfect; issues are found in all. The noise issue is common on almost all brands of bikes, and the Triumph Tiger is no exception. But the issue occurs occasionally, not frequently.

Is there any possibility of a starter issue with the Triumph Tiger 1050?

Although the bike is not susceptible to issues with the starting mechanism, you may face them sometimes. The problem may arise due to a blown starter motor fuse or a dead battery.

Does the Triumph Tiger leak oil?

There is no sign of excessive oil leakage in the Triumph Tiger. But nowadays, it seems normal to leak oil on a motorcycle. So there is nothing to wonder about if you also experience it over time.

Final words:

A high-performance motorcycle like the Triumph Tiger 1050 is not completely out of danger. It has some problems too. The good news is that the issues are not serious and can be fixed without even calling a professional mechanic. And you’ve already found the truth of the statement as we broke down the common Triumph Tiger 1050 problems with their effective solutions. We also guided you through the tactics for diagnosing major and minor issues with ease.

All the information provided above regarding the bike was collected based on in-depth analysis and research. So you can count on them to be exempt from unwanted, embarrassing incidents while riding. As long as you’re careful with your motorcycle, the risk of getting it damaged is lower. But if you become somewhat neglectful of it, the possibility of falling into jeopardy is always high.